2015 Ford Explorer Archives - Page 3 of 5 - For The Workshop

October 12, 2020

Goin' For That High & Tight Look.: I Saved 20 LBS by Removing the Roof Rack [Step-By-Step Guide]

I wanted to get rid of the roof rack for […]

0

September 28, 2020

"The Cars Drive By With the Boomin' System…": How to Upgrade the OEM Sony Speaker System [Step-By-Step Guide]

Did a stock speaker upgrade in my Sport with the […]

0

September 25, 2020

Damn…That Was Easy.: How to Upgrade From Ford Sync 2 to Ford Sync 3 [Step-By-Step Guide]

Easiest mod ever. Took me all of 20 minutes to […]

0

September 20, 2020

Take That Top Off, Baby!: How to Remove and Install the Intake Manifold [Step-By-Step Guide]

I ended up doing this for multiple reasons. Installation of […]

0

September 16, 2020

Let's Get This Thing Outta the Way.: How and Where to Move the Hood Anti-theft Switch [Step-By-Step Guide]

This modification is being done because I have some plans […]

0

September 14, 2020

Great Product…but I Think We Can Make It Better.: A Guide to Improving and Installing the X35Design Phenolic Spacer [Step-By-Step Guide]

Looks like a great product and look forward to getting […]

0

September 12, 2020

Let's Dial This Flow Up!: Flow 30% More Fuel With the Installation of a Set of XDI Fuel Injectors [Step-By-Step Guide]

This is a subsection of the larger modification section I […]

0

September 10, 2020

Don't Mind Me…Just Here Trimming the Fat.: How to Trim the Foam Insulation Beneath the Intake Manifold to Fit an Insulated Coolant Pipe [Step-By-Step Guide]

NOTE: ONLY REQUIRED WHEN USING A PHENOLIC INTAKE MANIFOLD SPACER. […]

0

August 31, 2020

Use It or Lose It? Never Used It So I Guess I'm Gonna Lost It.: How to Remove the Rear Wiper Blade and save 5 LBS [Step-By-Step Guide]

Not much going on here. Just wanted to clean up […]

0

August 29, 2020

Three Pounds? Three WHOLE Pounds???!!!: How To Save 3 LBS by Removing the Hood Insulation [Infographic]

Not a big mod or one that took a long […]

0

August 19, 2020

Let's Make This Easy…Again…Again.: Had the Transmission Fluid Flushed and Installed an Improved Drain Plug [Infographic]

Had the local Ford dealership do a full fluid exchange […]

0

Oh, She's Beefy!: How to Install a Set of MevoTech TTX Front Tie Rod Ends [Infographic]

If you’re anything like me, you sometimes enjoy putting upgraded […]

0

Let's Make This Easy…Again.: How to Install a PTU Drain Plug, Complete the PTU Vent Extension Modification and an Engine Oil Change [Infographic]

Got the engine as well as the PTU oil done. […]

0

Let's Make This Easy.: How to Install a Drain Plug Onto the RDU and Perform a Fluid Exchange on It [Step-By-Step Guide]

Drilled drain plug and filled unit with some Amsoil 80W90 […]

0

PFFFFHHHH, Who Says You Can't Do This?: How to Create In-Cabin Access for the LPFP Module [Step-By-Step Guide]

I was really dreading installing the fuel hanger that I […]

0